Front Door Unit Removal/Installation; Rear Door Unit Removal/Installation - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

FRONT DOOR UNIT REMOVAL/INSTALLATION

1. Remove the front door glass.

2. Remove the inner handle.

3. Remove the front door speaker.

4. Disconnect the power window motor connector, front door lock actuator connector, power outside mirror

5. Remove the door harness from the front door unit.

6. Remove the bolts.

7. Remove the screw.

8. Remove the front door actuator hook from the

front door unit.

9. Pull the front door unit slightly towards you, and

while keeping the power window regulator from

catching on the door, remove the door unit from

10. Pull out the inner handle cable and door lock knob

cable from the hole.

11. Remove the power window motor and power

window regulator from the door unit.

12. Install in the reverse order of removal.

1. Remove the rear door glass.

2. Remove the inner handle.

3. Remove the rear door speaker.

4. Disconnect the power window motor connector, and power door lock actuator connector.

5. Remove the rear door harness from the rear door unit.

6. Remove the bolts.

7. Remove the rear door lock actuator hook from the

rear door unit.

8. Pull the rear door unit slightly towards you, and

while keeping the power window regulator or

manual window regulator from catching on the

door, remove the door unit from the door.

9. Pull out the inner handle cable and door lock knob

cable from the hole.

A6E771458971W01

A6E771458971W02

Table of Contents