Front Seat Disassembly/Assembly - Mazda 2002 6 Workshop Manual

FRONT SEAT DISASSEMBLY/ASSEMBLY

Warning
• Handling the front seat (side air bag) improperly can accidentally deploy the side air bag, which
may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before handling the front
seat. (See T–117 SERVICE
1. Disconnect the negative battery cable and wait for more than 1 minute.
2. Remove the side air bag module. (See
3. Disassemble in the order indicated in the table.
4. Assemble in the reverse order of disassembly.
Driver's Seat (Normal Seat)
.
1 Headrest
2 Lumber support lever
(See S–109 Lumber support lever disassembly
note.)
3 Recliner dial (dial type)
(See S–109 Recliner dial disassembly
Recliner lever (lever type)
4 Lift lever outer
5 Lift lever inner
6 Side cover
(See S–109 Side cover disassembly
7 Reverce cover
S–106
SEAT
WARNINGS.)
T–121 SIDE AIR BAG MODULE
note.)
note.)
REMOVAL/INSTALLATION.)
8 Front buckle
9 Pole guide
10 Seat back trim
11 Seat warmer unit (European (L.H.D.) specs. only)
12 Seat back pad
13 Seat back frame
14 Seat cushion trim
15 Seat warmer unit (European (L.H.D.) specs. only)
16 Seat cushion pad
17 Seat cushion frame
18 Slide adjuster
A6E775257100W02
A6E7752W017