Oil Cooler; Oil Cooler Removal/Installation - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

1. Remove the under cover.

2. Drain the engine coolant. (See

3. Remove the oil filter cover, and drain the engine oil into a container. (See

4. Remove in the order indicated in the table.

5. Use a clean rag to wipe off the mounting surface

on the oil cooler.

6. Install in the reverse order of removal.

7. Inspect the oil level.

• If necessary, add oil. (See

INSPECTION.)

8. Start the engine and inspect for oil leakage.

• If the oil leaks, specify the faulty part and

repair or replace it.

Oil cooler

D L UBRICATION SYSTEM

E–4 ENGINE COOLANT

D–4 ENGINE OIL

REPLACEMENT.)

D–6 OIL FILTER

A6E331819900W01

REPLACEMENT.)

Table of Contents