Inner Handle Removal/Installation; Regulator Handle Removal; Regulator Handle Installation - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

INNER HANDLE REMOVAL/INSTALLATION

1. Remove the front door trim.

2. Using a flathead screwdriver, press and hold the

hook in the direction indicated by arrow (1), and

pull the shaft in the direction indicated by arrow

(2), remove the shaft.

3. Pull off the inner handle, and remove the door

lock knob cable and inner handle cable.

4. Install in the reverse order of removal.

1. Remove the regulator handle clip using a rag as

1. Install the clip in the regulator handle.

2. Close the door glass fully and push the regulator

handle on as shown.

A6E771458330W01

A6E771458580W01

A6E771458580W02

Table of Contents