Rear Oil Seal; Rear Oil Seal Replacement - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

1. Remove the flywheel. (MTX) (See

2. Remove the drive plate. (ATX) (See

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

Rear oil seal

B–25 Rear Oil Seal Installation

Rear Oil Seal Installation Note

1. Apply silicone sealant to the mating faces as

Dot diameter:

4.0—6.0 mm {0.16—0.23 in}

2. Apply clean engine oil to the new oil seal lip.

3. Install the rear oil seal using the installer as

4. Tighten the rear oil seal bolts in the order as

Tightening torque:

8.0—11.5 N·m {81.6—117.2 kgf·m, 70.9—

101.7 in·lbf}

REAR OIL SEAL

H–11 CLUTCH UNIT

REMOVAL/INSTALLATION)

K–43 DRIVE PLATE

REMOVAL/INSTALLATION)

A6E222211399W01

Table of Contents