Mazda 2002 6 Workshop Manual page 577

Hide thumbs Also See for 2002 6:

Table of Contents

Steering Wheel Removal Note

• Do not try to remove the steering wheel by hitting the shaft with a hammer. The column will

1. Set the vehicle in the straight-ahead position.

2. Remove the steering wheel using a suitable puller.

Steering Lock Mounting Bolts Removal Note

1. Make a groove in the heads of the steering lock

mounting bolts using a chisel and a hammer.

2. Remove the bolts using a screwdriver.

3. Disassemble the steering lock component.

Steering Lock Mounting Bolts Installation Note

1. Assemble the steering lock component to the steering shaft.

2. Verify that the lock operates correctly.

3. Install new steering lock mounting bolts.

4. Tighten the bolts until the heads break off.

Steering Shaft Installation Note

• Do not apply a shock in the axial direction of the shaft.

1. Lock the tilt lever.

2. Tighten bolt A.

3. Tighten nut B.

4. Tighten nut C.

Steering Wheel Installation Note

1. Set the wheels in the straight-ahead position, and install the steering wheel.

ENGINE SPEED SENSING POWER STEERING

Chapters

Table of Contents