Mazda 2002 6 Workshop Manual page 828

Hide thumbs Also See for 2002 6:

Table of Contents

Reusing Glass

• Before removing the rear window glass from the body, mark the position of the glass by affixing tape to

the glass and body panel.

1. Make a hole through the sealant, avoiding pins,

from the inside of the vehicle using an awl.

2. Pass the SST (piano wire) through the hole.

• Using a SST (piano wire) with bare hands

can cause injury. Always wear gloves

when using a SST (piano wire).

3. Wind each end of the SST (piano wire) around a

• Use a long sawing action to spread the work

over the whole length of the SST (piano

wire) to prevent it from breaking.

WINDOW GLASS

Chapters

Table of Contents