Mazda 2002 6 Workshop Manual page 678

Hide thumbs Also See for 2002 6:

Table of Contents

ON-BOARD DIAGNOSTIC (DYNAMIC STABILITY CONTROL)

Diagnostic procedure

INSPECT WHEEL-SPEED SENSOR CIRCUIT

FOR OPEN CIRCUIT

• Turn ignition key to OFF.

• Disconnect DSC HU/CM connector.

• Measure resistance between suspected

sensor terminals of DSC HU/CM connector

(harness side).

— RF wheel-speed sensor: M—I

— LF wheel-speed sensor: F—J

— RR wheel-speed sensor: K—H

— LR wheel-speed sensor: Q—N

• Is resistance within 1.3—1.7 kilohm?

Yes Go to next step.

Go to Step 3.

Chapters

Table of Contents