FRONT FENDER PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front side turn light.
3. Remove the fender molding. (See
4. Remove the front bumper. (See
5. Remove the front combination light. (See
6. Remove in the order indicated in the table.
1
Front fender panel
2
Seal plate
7. Install in the reverse order of removal.
End Of Sie
S–12
FRONT FENDER PANEL
FRONT FENDER PANEL
S–50 COWL GRILLE
S–47 FRONT BUMPER
T–26 FRONT COMBINATION LIGHT
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
A6E771252110W01
A6E7712W001