B-PILLAR LOWER TRIM REMOVAL/INSTALLATION
1. Remove the front scuff plate.
2. Remove the rear scuff plate.
3. Pull the area marked A, then remove one side of
the B-pillar lower trim.
4. Pull the B-pillar lower trim, then remove the pin
from the body.
5. Remove the B-pillar lower trim.
6. Install in the reverse order of removal.
End Of Sie
B-PILLAR UPPER TRIM REMOVAL/INSTALLATION
1. Remove the upper anchor of the front seat belt.
2. Remove the B-pillar lower trim.
3. Turn the seaming welt over.
4. Pull the B-pillar upper trim toward you, then
disengage, clip B, and pin C from the body.
5. Disengage hook A from the body, then remove B-
pillar upper trim.
6. Install in the reverse order of removal.
End Of Sie
FRONT SIDE TRIM REMOVAL/INSTALLATION
1. Remove the front scuff plate.
2. Turn the seaming welt over.
3. Pull the front side trim toward you, then
disengage clip A and the stud bolt, then remove
the front side trim.
4. Install in the reverse order of removal.
End Of Sie
S–88
TRIM
A6E774468220W01
A6E7744W021
A6E774468210W01
A6E7744W025
A6E774468370W01
A6E7744W014