Mazda 2002 6 Workshop Manual page 1031

Hide thumbs Also See for 2002 6:

Table of Contents

3. Connect the SST (Adapter harness) to the

passenger-side air bag module as shown in the

4. Tie the passenger-side air bag module to the tire

with the module facing the center of the tire. Wrap

the wire harness through the tire and around the

bolts at least four times.

• If the air bag module ia not properly

installed to the tire, serious injury may

occur when the module is deployed,

When installing the air bag module to the

tire, make sure the module is facing the

center of the tire.

5. Stack the tire with the passenger-side air bag

module on top of two tires. Stack another tire that

has a wheel on top of the four tires.

6. Tie all tires together with wire.

7. Connect the SST (Deployment tool) to the SST

(Adapter harness).

8. Connect both SSTs (Deployment tool) to the

battery. Connect the power supply red clip to the

positive battery terminal, and the black clip to the

negative battery terminal.

9. Verify that the red lamp on both SSTs

(Deployment tool) is illuminated.

10. Make sure all persons are standing at least 6 m

{20 ft} away from the vehicle.

AIR BAG SYSTEM

Chapters

Table of Contents