Rear Door Speaker; Rear Door Speaker Inspection - Mazda 2002 6 Workshop Manual

REAR DOOR SPEAKER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the rear door trim.
3. Remove in the order indicated in the table.
1 Screw
2 Connector
3

Rear door speaker

(See T–102 Rear Door Speaker Installation
4. Install in the reverse order of removal.
Rear Door Speaker Installation Note
1. Attach the speaker with the wiring harness placed
in the groove of the door unit panel.
Caution
• If the speaker is attached with the
harness placed outside of the groove, the
wiring harness might be broken.
End Of Sie

REAR DOOR SPEAKER INSPECTION

1. Inspect for resistance between the rear door
speaker terminals using an ohmmeter.
• If not as specified, replace the rear door
speaker.
2. To verify that the rear door speaker outputs sound, apply voltage to the rear door speaker and release using a
1.5-V battery.
• If not outputs sound, replace the rear door speaker.
End Of Sie
T–102
AUDIO AND NAVIGATION SYSTEM
Note)
A6E8124W032
A6E812466964W01
A6E8124W003
A6E8124W002
A6E812466964W02
A6E8124W040