Liftgate Lock Actuator Inspection; Door Lock Timer Unit Removal/Installation - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

LIFTGATE LOCK ACTUATOR INSPECTION

1. Disconnect the liftgate lock actuator connector.

2. Apply battery positive voltage to the liftgate lock

actuator terminals and inspect the operation of

the liftgate lock actuator.

• If not as specified, replace the liftgate lock.

Actuator operation

1. Disconnect the negative battery cable.

2. Remove the glove compartment. (L.H.D.)

3. Remove the bolt.

4. While inclining the door lock timer unit along the

body panel in the direction indicated by the arrow,

disengage the bracket hook from the hole in the

5. Disconnect the door lock timer unit connector.

6. Remove the door lock timer unit.

7. Remove the screw, then remove the bracket.

• The screw which fixes the door lock timer

unit and bracket is for a body ground

connection. Be sure to secure the screw

when installing.

8. Install in the reverse order of removal.

POWER DOOR LOCK SYSTEM

A6E771862310W01

A6E771867830W01

Table of Contents