Interlock Cable Adjustment - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

INTERLOCK CABLE ADJUSTMENT

1. Turn the ignition switch to ON position (engine OFF).

2. Pull up the lock piece of the interlock cable to

release the lock.

3. Remove the clip of the selector lever base plate,

then remove the interlock cable from the U-

4. Remove the interlock cable from the selector

5. Fully pull the end of the interlock cable to the

selector lever.

6. Remove the lock unit from the bracket.

7. Verify that the markings on the slider pin and the

lock unit are aligned.

AUTOMATIC TRANSAXLE SHIFT MECHANISM

BHE051409000W03

INTERLOCK CABLE

INTER LOCK UNIT

Table of Contents