Seat Warmer Unit Inspection - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

SEAT WARMER UNIT INSPECTION

1. Remove the front seat. (See

2. Remove the seat cushion trim.

3. While inspecting for continuity between the

terminals A and B of the connector, use a dryer to

warm the thermostat of the seat warmer unit on

seat cushion.

4. When the indication on the ohmmeter is no

continuity, turn off the dryer, then use a

thermometer to measure the temperature of the

5. Verify that the temperature is approximately

29 °C {84 °F}.

6. Verify that there is continuity between the terminals

of seat warmer unit's connector using an

ohmmeter when temperature drops to

approximately 20 °C {68 °F}.

S–105 FRONT SEAT

REMOVAL/INSTALLATION.)

A6E775259000W03

Table of Contents