Mazda 2002 6 Workshop Manual page 460

Hide thumbs Also See for 2002 6:

Table of Contents

9. Pull the slider pin outward until it contacts the

brake pedal stopper rubber and rotate the slider

pin to lock.

10. Verify that the shift the selector lever in P position.

11. Install the interlock cable end onto the cam pin on

the selector lever.

12. Fit the interlock cable in the U–groove in the

selector lever base plate, and install the clip.

13. Press the interlock cable lock piece in until it is

• Applying a load to the interlock cable

while pressing the lock piece in can

affect the lock unit operation.

14. Remove the snap pin from the lock unit hole A, B

AUTOMATIC TRANSAXLE SHIFT MECHANISM

BRAKE SWITCH

Chapters

Table of Contents