Shift Mechanism; Shift Mechanism Removal/Installation - Mazda 2002 6 Workshop Manual

SHIFT MECHANISM REMOVAL/INSTALLATION

1. Remove the battery, battery tray and battery bracket.
2. Remove the air cleaner component. (See
3. Remove the dashboard compleat.
(See S–82 DASHBOARD
4. Remove the SAS control module.
(See T–124 SAS UNIT
5. Remove the climate control unit. (See
CONTROL UNIT INSTALLATION.)
6. Remove the rear heat duct. (See
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. Install the air cleaner component.
10. After installation, verify that the shift lever can be shifted smoothly into each position.
.
1 Shift lever knob
2 Boot panel
3 Clip
4 Clip
5 Clip
6 Clip

SHIFT MECHANISM

SHIFT MECHANISM
F–10 INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
U–44 CLIMATE CONTROL UNIT
U–23 REAR HEAT DUCT
REMOVAL/INSTALLATION.)
REMOVAL.) (See
REMOVAL/INSTALLATION.)
7 Plain Washer
8 Seal plate
9 Main shift cable
10 Main select cable
(See J–10 Select Cable Installation
11 Sift lever assembly
A6E511446010W01
U–45 CLIMATE
J
A6E5114W001
Note)
J–9