ROOF MOLDING REMOVAL
1. Detach the clips which secure A and B sections of
roof molding, using a screwdriver or equivalent
tool.
2. While pulling the roof molding up, detach the fit
for the T stat of the A section and the roof molding
and then remove the roof molding.
End Of Sie
ROOF MOLDING INSTALLATION
1. Attach the roof molding to the T stud at the A
section.
2. Press in the roof molding along the direction (1)
shown in the figure and attach it to the clip A at
the B section.
3. Hook the roof molding to the clip B at the C
section, press it in, and attach the roof molding to
the clip B.
4. Press the roof molding along the direction (2)
shown in the figure and attach it to the clip A at
the B section.
5. Attach the roof molding to the T stud at the D
section.
End Of Sie
MOLDING
A6E773050620W01
A6E7730W007
A6E773050620W02
S
A6E7730W006
S–57