Mazda 2002 6 Workshop Manual page 562

Hide thumbs Also See for 2002 6:

Table of Contents

Boot Band (Wheel Side) Disassembly Note

• The boot band does not need to be removed unless it is being replaced.

1. Remove the boot clamp with end clamp pliers as

shown and discard the clamp.

Boot Band (Transaxle Side) Disassembly Note

1. Pry up the locking clips using a screwdriver.

2. Pull back the end of the band.

Outer Ring Disassembly Note

1. Mark the outer ring and the shaft for proper

2. Remove the outer ring.

Snap Ring, Tripod Joint Disassembly Note

1. Mark the shaft and tripod joint for proper assembly.

2. Remove the snap ring using snap-ring pliers.

3. Remove the tripod joint from the shaft.

• Do not tap the tripod joint with a hammer.

Chapters

Table of Contents