OIL PAN REMOVAL/INSTALLATION
Warning
• Hot engine and engine oil can cause severe burns. Turn off the engine and wait until it and the
engine oil have cooled.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the engine oil. (See
4. Remove the engine front cover. (See
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Inspect the oil level. (See
8. Start the engine and inspect for oil leakage.
• If the oil leaks, specify the faulty part and repair or replace it.
.
1
Oil level gauge pipe
D–8
OIL PAN
OIL PAN
D–4 ENGINE OIL
REPLACEMENT.)
B–10 TIMING CHAIN
D–4 ENGINE OIL
INSPECTION.)
REMOVAL/INSTALLATION.)
2
Oil pan (See
D–9 Oil Pan Installation
A6E332010040W01
AME3320W001
Note)