Cruise Control Switch Removal/Installation - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

7. Install the grommet to the cable bracket.

8. Move the throttle, and install the end fitting of the

actuator cable to the throttle.

• Due to the possibility of actuator cable

damage, make sure there is no twisting in

the cable when installing.

9. To adjust the free play, push or pull the actuator

cable directly behind the spring two times.

10. Turn the ratchet ring in the direction shown by the

arrow to lock it.

11. Slide the lock lever in the direction shown by the

arrow to lock the adjuster.

12. Install the cover to the cruise actuator.

13. Install the plug hole plate.

CRUISE CONTROL SWITCH REMOVAL/INSTALLATION

• The audio control switch and the cruise control switch use a common connector.

T–99 AUDIO CONTROL SWITCH

CRUISE CONTROL SYSTEM

REMOVAL/INSTALLATION.)

A6E812866341W01

Table of Contents