Air Bag Module And Pre-Tensioner Seat Belt - Mazda 2002 6 Workshop Manual

Side air bag module
1. Disconnect the side air bag module connector.
2. Connect the SST (Adapter harness) to the side
air bag module.
3. Connect the SST (Deployment tool) to the SST
(Adapter harness).
4. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
5. Verify that the red light on the SST (Deployment
tool) is illuminated.
6. Make sure all persons are standing at least 6 m
{20 ft} from the vehicle.
7. Press the activation switch on the SST
(Deployment tool) to deploy the side air bag
module.
Curtain air bag module
1. Remove the side tire house trim. (4SD)
2. Remove the side trunk side trim. (5HB)
End Of Sie
T–130
AIR BAG SYSTEM
A6E8130W029
A6E8130W027
A6E8130W028