Trunk Lid Adjustment; Stay Damper Disposal - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

TRUNK LID ADJUSTMENT

1. Measure the gap and height between the front door and the body.

2. If not as specified, loosen the door hinge

installation bolts or the door lock striker

installation screws, and reposition the door.

a: 2.5—4.5 mm {0.10—0.18 in}

b: -1.0—1.0 mm {-0.04—0.04 in}

c: 4.0—8.0 mm {0.16—0.31 in}

3. Tighten the bolts or screws.

• The gas in the stay damper is colorless, odorless, and non-toxic.

1. Wear protective eye wear.

2. Lay the stay damper flat.

3. Saw through the stay damper body using a

4. Allow the gas to escape from the stay damper.

5. Discard the stay damper.

A6E772052610W03

A6E772052610W04

Table of Contents