Mazda 2002 6 Workshop Manual page 159

Hide thumbs Also See for 2002 6:

Table of Contents

European (L.H.D.) specs.

PCM connector

Set Nut/bolt Removal Note

1. Using a chisel and a hammer, cut a groove on the head of the set nut/bolt so that a screwdriver can be

2. Loose the set nut/bolt using an impact

screwdriver or pliers.

Set Nut/bolt Installation Note

1. Install a new set nut/bolt and tighten it until the

neck of the nut/bolt is cut.

CONTROL SYSTEM

Chapters

Table of Contents