Thermostat; Thermostat Removal/Installation - Mazda 2002 6 Workshop Manual

THERMOSTAT REMOVAL/INSTALLATION

1. Remove the plug hole plate.
2. Disconnect the negative battery cable.
3. Drain the engine coolant. (See
4. Remove the drive belt. (See
5. Remove the washer tank.
6. Remove the P/S oil pump.
Note
• Remove the P/S oil pump with hoses and pipe still connected.
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. Refill the engine coolant. (See
10. Inspect the engine coolant leakage. (See
11.
1 Bypass hose
2 Lower hose
End Of Sie

THERMOSTAT

THERMOSTAT
E–3 COOLING SYSTEM SERVICE
B–3 DRIVE BELT REPLACEMENT.)
E–4 ENGINE COOLANT
E–4 ENGINE COOLANT LEAKAGE
WARNINGS.)
REPLACEMENT.)
INSPECTION.)
3 Thermostat assembly
A6E361815171W01
E
AME3618W001
E–7