Car-Navigation Unit; Lcd Unit Removal/Installation - Mazda 2002 6 Workshop Manual

CAR-NAVIGATION UNIT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove in the order indicated in the table.
1 Bolt
2

Car-navigation unit

(See T–98 Car-navigation Unit Installation
3 Connector
4. Install in the reverse order of removal.
Car-navigation Unit Installation Note
1. Insert the car-navigation unit bracket into the
dashboard member hole, and with the car-
navigation unit fixed in place install the bolt.
End Of Sie

LCD UNIT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the center panel module. (See
3. Remove in the order indicated in the table.
1 Cover
2 Bolt
3 Screw
4 LCD unit
(See T–98 LCD Unit Removal
5 Connector
4. Install in the reverse order of removal.
LCD Unit Removal Note
1. Pull up the front part of the LCD unit.
T–98
AUDIO AND NAVIGATION SYSTEM
Note)
T–96 CENTER PANEL MODULE
Note)
REMOVAL/INSTALLATION.)
A6E812466902W01
A6E8124W015
A6E8124W016
A6E812466902W02
A6E8124W014
A6E8124W017