Trunk Lid Disassembly/Assembly - Mazda 2002 6 Workshop Manual

6. Remove the nuts, then remove the trunk lid.
7. Remove the bolts, then remove the trunk lid
hinge.
8. Install in the reverse order of removal.
9. Adjust the trunk lid. (See
ADJUSTMENT.)
End Of Sie

TRUNK LID DISASSEMBLY/ASSEMBLY

1. Disconnect the negative battery cable.
2. Remove the trunk lid trim.
3. To remove the trunk lid outer handle and trunk lid key cylinder, remove the rear finisher.
4. Disassemble in the order indicated in the table.
5. Assemble in the reverse order of disassembly.
1 Trunk Lid latch and lock actuator
2 Trunk Lid outer handle
3 Trunk Lid key cylinder
4 Clip
End Of Sie
S–40
TRUNK LID
S–41 TRUNK LID
.
5 Stopper
6 Trunk Lid weatherstrip
7 Trunk Lid
A6E7720W007
A6E772052610W02
A6E7720W006