Mazda 2002 6 Workshop Manual page 125

2. Assemble in the reverse order of disassembly.
1 Packing
2 Fuel pump unit
3 Fuel gauge sender unit
Except for European (L.H.D. U.K.) Specs.
Caution
• Do not touch the fuel pump discharge pipe unless it is necessary. If servicing is needed, be careful
not to damage the pipe with tools or other objects, or by applying lateral stress. If the pipe is
damaged, it may cause fuel leakage or a fuel pump operation malfunction.
• Be careful not to damage the pressure regulator or fuel hose. If it is damaged, it may cause fuel
leakage.
• When any parts are removed, be careful that no foreign materials penetrate the part. Otherwise it
may cause a fuel pump unit operation malfunction.
• Protect any removed parts using rubber matting to prevent damage. Furthermore, if a part has
been dropped, do not reuse it, replace it with a new one.
• Do not use any textile products such as cotton work gloves. If used, fabric may get caught in the
fuel pump or pressure regulator causing a fuel pump unit operation malfunction.
• Do not touch the flange seal side of the set plate. If it is damaged or foreign material adheres, it
may cause fuel leakage.
• When removing foreign material inside the reserve cup, use fuel for flushing. If foreign material is
removed with air, it may penetrate into the jet pump pressure regulator.
FUEL SYSTEM
F – 2 4 FUEL AND EMISSION CONTROL SYSTEMS FUEL SYSTEM
F
A6E3912W025
F–24–1