Audio Control Switch Inspection; Audio Amplifier - Mazda 2002 6 Workshop Manual

AUDIO CONTROL SWITCH INSPECTION

1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (See
INSTALLATION.)
3. Disconnect the audio control switch connector.
4. Measure the resistance and inspect for continuity
between the cruise control switch terminals using
an ohmmeter.
• If not as specified, replace the cruise control
switch.
End Of Sie
AUDIO AMPLIFIER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
1 Bolt
2 Connector
3

Audio amplifier

3. Install in the reverse order of removal.
End Of Sie
T–100
AUDIO AND NAVIGATION SYSTEM
T–120 DRIVER-SIDE AIR BAG MODULE REMOVAL/
A6E8124W028
A6E812400148W02
A6E8124W043
A6E812466910W01
A6E8124W010