Mazda 2002 6 Workshop Manual page 958

7. Verify that the rear wiper stops in the park
position.
• If not as specified, replace the rear wiper
motor.
End Of Sie
REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
1 Cap
2 Nut
3 Rear wiper arm (See
Installation Note)
4 Rear wiper blade
5 Rubber brush
2. Install in the reverse order of removal.
3. Adjust the rear wiper arm and blade. (See
REAR WIPER ARM AND BLADE
ADJUSTMENT)
Rear Wiper Arm Installation Note
1. Clean the rear wiper arm connector shaft using a
wire brush before installing the rear wiper arm.
End Of Sie
WIPER AND WASHER
T–63 Rear Wiper Arm
T–64
A6E8116W119
A6E8116W133
A6E811667420W01
T
A6E8116W112
A6E8116W103
T–63