Mazda 2002 6 Workshop Manual page 567

1 Boot band (wheel side)
(See M–20 Boot Band (Wheel Side) Disassembly
Note)
(See M–23 Boot Band (Wheel Side) Assembly
Note)
2 Boot band (transaxle side)
See M–20 Boot Band (Transaxle Side) Disassembly
Note
See M–23 Boot Band (Transaxle Side) Assembly
Note
3 Clip
See M–25 Clip Disassembly Note
See M–26 Outer Ring, Clip Assembly Note
4 Outer ring
(See M–26 Outer Ring, Clip Assembly
5 Snap ring
(See M–26 Cage, Inner Ring, Balls, Snap Ring
Assembly Note)
6 Balls
(See M–25 Balls, Inner Ring, Cage Disassembly
Note)
(See M–26 Cage, Inner Ring, Balls, Snap Ring
Assembly Note)
Clip Disassembly Note
1. Mark the drive shaft and outer ring for proper
assembly.
Caution
• Mark with paint; do not use a punch.
2. Remove the clip.
Balls, Inner Ring, Cage Disassembly Note
1. Mark the inner ring and cage.
Caution
• Mark with paint; do not use a punch.
2. Remove the snap ring using snap-ring pliers.
3. Turn the cage approximately 30 degree and pull
the cage and balls away from the inner ring.
DRIVE SHAFT
7 Inner Ring
(See
Note)
(See
Assembly
8 Cage
(See
Note)
(See
Assembly
9 Boot
(See
10 Dynamic damper
(See
Note)
11 ABS sensor rotor
(See
Disassembly
(See
Note)
12 Shaft and ball joint component
M–25 Balls, Inner Ring, Cage Disassembly
M–26 Cage, Inner Ring, Balls, Snap Ring
Note)
M–25 Balls, Inner Ring, Cage Disassembly
M–26 Cage, Inner Ring, Balls, Snap Ring
Note)
M–26 Boot Assembly Note)
M–26 Dynamic Damper Assembly
M–21 ABS Sensor Rotor (With ABS)
Note)
M–22 ABS Sensor Rotor (With ABS) Assembly
Note)
M
A6E6316W010
A6E6316W015
M–25