Loading And Saving The Gateway Configuration; Upgrading The Firmware Of Your Gateway - 3Com OfficeConnect 3CR856-95 User Manual

Loading and saving the Gateway Configuration

Figure 55 Configuration Screen
Select the Configuration tab to display the Configuration
screen.(Figure 55)
Click the BACKUP button to save the current configurations
I
of the OfficeConnect Cable/DSL Secure Gateway. You will be
prompted to download and save a file to disk.
If you want to reinstate the configuration settings previously
I
saved to a file, press the Browse button to locate the backup
file on your computer, and then click the RESTORE button to
copy the configuration back to the Gateway.
For security purposes restoring the configuration does not
change the password.
If you want to reset the settings on your Gateway to those
I
that were loaded at the factory, click RESET. You will lose all
your configuration changes. The Gateway LAN IP address will
revert to 192.168.1.1, and the DHCP server on the LAN will
be enabled. You may need to reconfigure and restart your
computer to re-establish communication with the Gateway.

Upgrading the firmware of your Gateway

The Upgrade facility allows you to install on the Gateway any
new releases of system software that 3Com may make available.
3DES encryption is not shipped with the Gateway as standard
due to international restrictions on encryption. If your country
permits its use it can be downloaded from the 3Com web site at
http://www.3com.com/
58