Specifications; Installation; Loading The Cmp File, Booting The Device - 3Com VCX V7122 User Manual

Provides a TFTP address, enabling network separation of TFTP and BootP utilities.
Tools to backup and restore the local database.
Templates.
User-defined names for each entity.
Option for changing MAC address.
Protection against entering faulty information.
Remote reset.
Unicast BootP response.
User-initiated BootP respond, for remote provisioning over WAN.
Filtered display of BootP requests.
Location of other BootP utilities that contain the same MAC entity.
Common log window for both BootP and TFTP sessions.
Works with Windows 98, Windows NT, Windows 2000 and Windows XP.

Specifications

BootP standards: RFC 951 and RFC 1542
TFTP standards: RFC 1350 and RFC 906
Operating System: Windows 98, Windows NT, Windows 2000 and Windows XP
Max number of MAC entries: 200

Installation

To install the BootP/TFTP on your computer, follow these steps:
1
Locate the BootP folder on the VoIP gateway supplied CD ROM and open the file
Setup.exe.
2
Follow the prompts from the installation wizard to complete the installation.
To open the BootP/TFTP, follow these steps:
1 From the Start menu on your computer, navigate to Programs and then click on BootP.
2
The first time that you run the BootP/TFTP, the program prompts you to set the user
preferences. See Setting the Preferences
preferences.

Loading the cmp File, Booting the Device

Once the application is running, and the preferences set (see
page 197), for each unit that is to be supported, enter parameters into the tool to set up the
network configuration information and initialization file names. Each unit is identified by a
MAC address. For information on how to configure (add, delete and edit) units see
Configuring the BootP Clients
To load the software and configuration files, follow these steps:
1 Create a folder on your computer that contains all software and configuration files that
are needed as part of the TFTP process.
194
on page
on page 199.
3Com VCX V7122 SIP VoIP Gateway User Manual
197 for information on setting the
Setting the Preferences on