Table of Contents
Advertisement
Overview
Choosing a
Docked or Mobile
Configuration
If you install PictureTel Live on a laptop docking station, you need
to make special provisions for using your laptop both in and out of
the docking station. This involves creating a batch file that lets you
choose between docked and mobile configurations when starting
up your laptop.
After installing the PictureTel Live software, follow these steps to
create a batch file that allows you to choose between a docked or
mobile configuration during start-up. Perform these 5 steps with the
laptop connected to the docking station:
1. Copy SYSTEM.INI to SYSTEM.DOC.
2. Run the Windows setup program and change your video driver to
VGA.
3. Try undocking the laptop and running Windows. If everything
works properly, copy SYSTEM.INI to SYSTEM.LAP.
4. Create an AUTOEXEC.BAT file that will prompt you for either the
docked or mobile configuration when you start up. Here is one
you can use or modify:
@ECHO OFF
PROMPT $p$g
PATH C:\;C:\WINDOWS;C:\DOS;C:\NECUTILS
SET TEMP=C:\TEMP
IF NOT EXIST VERSION. GOTO SETUP
CLS
Laptop Docking
Configuration
I
Station
I-1
Advertisement
Table of Contents
