Table of Contents
Advertisement
Connecting a Second FlipCam Camera
To connect a second FlipCam camera to your PictureTel Live100,
follow these steps:
1. Be sure your PC is turned off.
Do not connect or disconnect Live100 components when
your PC is on. Doing so may damage the Live100 hardware.
2. Plug the camera cable into the socket labeled
from the 15-pin VGA connector for your PC monitor.
3. To enable the camera, power on your PC, bring up the PictureTel
Live application, and from the Tools menu choose Preferences.
Choose the Cameras category and assign a name to the second
FlipCam camera and select OK.
Connecting a VCR or Other Video Source
To connect a VCR or other composite video source (such as a
camcorder) to the Live100 boards, follow these steps:
1. Be sure your PC is turned off.
Do not connect or disconnect Live100 components when
your PC is on. Doing so may damage the Live100 hardware.
2. Plug the VCR video-out cable into the yellow video-in socket
labeled
Use a cable with an RCA connector.
3. Plug the Auxiliary Audio cable into the socket labeled
the Audio Communications board.
4. Plug the VCR audio-out cable into the audio-in socket
Auxiliary Audio cable.
Caution
Caution
on the VGA Video board.
Optional Devices
8A
that is farthest
3
or
3A
on
on the
3-17
Advertisement
Table of Contents
