Connecting Other Audio Devices - PictureTel LIVE50 Installation Manual

INSTALLING PICTURETEL LIVE50 HARDWARE
Connecting
Other Audio
Devices
2-20
In place of the earpiece or speakerphone, you can connect other
audio input and output devices to the Live50 board, such as a
multimedia microphone and amplified speakers. You plug the
microphone and speakers into the same sockets you use to connect
the earpiece.
To connect a multimedia microphone and amplified speakers:
1. Plug the stereo connector from the amplified speakers into the
socket labeled
When you connect amplified speakers, use only a stereo
connector that has tip, ring, and sleeve segments, as shown
below. If you use a mono connector that has only tip and
sleeve segments, you might damage the Live50 board.
2. Plug the connector from the microphone into the socket labeled
on the Live50 board.
Speaker socket
Microphone socket
on the Live50 board.
Warning
Ring
Tip
Sleeve
Sleeve
Tip
Ring