Brocade Communications Systems WFT-2D User Manual page 109

3. (Optional) Enter a discovery request name (such as, Manual 06/12/2009) in the Discovery
4. Select Network Address from the list.
5. Enter the IP address (IPv4 or IPv6 formats) or host name in the Network Address field.
6. Click Add.
7.
8. Configure discovery authentication by choosing one of the following options:
9. Enter the port number in the Port field.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 14
Add Host Adapters dialog box
Request Name field.
The IP address or host name of the Host displays in the Host List.
Configure Host credentials by choosing one of the following options:
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
step 8.
•
To configure WMI server credentials, select the Windows Management Instrumentation
(WMI) option. Continue with
If you do not need to configure Host credentials, skip to
•
To configure discovery with authentication, select the HTTPS option in Protocol.
•
To configure discovery without authentication, select the HTTP option in Protocol.
The HCM agent default is 34568. The CIM server HTTPS default is 5989. The CIM server HTTP
default is 5988. The WMI HTTPS default is 5986. The WMI HTTP default is 5985.
step 8.
step
Host discovery
step 9.
13.
3
57