4
Software Configuration
Configuring SNMP v3 credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
2. Select Trap Forwarding Credentials in the Category pane.
3. Enter the SNMP v3 name (case sensitive, 1 to 16 characters) to identify the credentials in the
4. Select on of the following authentication protocols from the Auth Protocol list.
5. Enter the SNMP v3 authentication password (case sensitive, 1 to 16 characters) in the Auth
6. Select one of the following privacy protocol types from the Priv Protocol list.
7.
8. Click Apply or OK to save your work.
Software Configuration
The Management application allows you to configure the following software settings:
•
•
•
•
•
•
•
•
108
The Options dialog box displays.
The Trap Forwarding Credentials pane displays
User Name field.
Allows all printable ASCII characters.
•
HMAC_MD5 (continue with
•
HMAC_SHA (continue with
•
NONE (go to
step
6)
Password and Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
•
CBC-DES (continue with
•
CFB_AES-128 (continue with
•
CFB_AES_256 (continue with
•
NONE (go to
step
8)
Enter the privacy password (case sensitive, 8 to 16 characters) in the Priv Password and
Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
Certificates
— Support settings to allow enhanced diagnostics.
Client export port settings
Client/Server IP
— IP configuration settings.
Memory allocation settings
Product communication settings
products.
FTP/SCP/SFTP server settings
Server port settings
— Server port settings.
Support mode settings
— Support settings to allow enhanced diagnostics.
(Figure
step
5)
step
5)
step
7)
step
7)
step
7)
— A port for communication between the client and server.
— Memory allocation for the client and server.
— Connections between the server and SAN switches or IP
— Internal or external FTP or SCP server settings.
36).
Brocade Network Advisor SAN User Manual
53-1003154-01