Viewing Names - Brocade Communications Systems WFT-2D User Manual

3. Select one of the following options.
4. Click OK on the Duplicated Names dialog box.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.

Viewing names

To view names associated with devices, complete the following steps.
1. Select Configure > Names.
FIGURE 32
2. Select All Names from the Display list.
Brocade Network Advisor SAN User Manual
53-1003154-01
•
If you select Append Incremental numbers for all repetitive names, the names are edited
automatically using incremental numbering.
•
If you select I will fix them myself, edit the name in the Name field.
The Configure Names dialog box displays
Configure Names dialog box
Only devices with a name display. The table displays the following information.
•
Scope list — Select a search value (Name or WWN) from the list.
•
Search text box — Enter the name or WWN of the device for which you are searching.
•
Search button — Click to search on the value in the Search field. For more information,
refer to "Searching for a device by name"
(Figure 32).
on page 101.
4
Name settings
97