Setting Names To Be Non-Unique - Brocade Communications Systems WFT-2D User Manual

To edit duplicate names, complete the following steps.
1. Select Server > Options.
2. Select SAN Names in the Category list.
FIGURE 30
3. Select Set names to be unique to require that names be unique on your system.
4. Click OK on the Options dialog box.
5. Click OK on the "duplicate names may exist" message.

Setting names to be non-unique

You can choose to allow duplicate names in your fabric.
To set names to be non-unique, complete the following steps.
1. Select Server > Options.
2. Select SAN Names in the Category list.
3. Select Set names to be non-unique to allow duplicate names on your system.
4. Click OK on the Options dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Options dialog box displays.
The SAN Names pane displays
Options dialog box (SAN Names pane)
To fix duplicated names, refer to
The Options dialog box displays.
(Figure 30).
"Fixing duplicate names"
Name settings
on page 96.
4
95