Configuring The Server Name - Brocade Communications Systems WFT-2D User Manual

Configuring the server name

To configure the server name, complete the following steps.
1. Select Server > Options.
2. Select Security Misc in the Category list.
3. Enter the server name in the Server Name field.
4. Click OK on the confirmation message.
5. Click Apply or OK to save your work.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Options dialog box displays.
The Security Misc pane displays
FIGURE 33
Options dialog box (Security Misc pane)
The Server Name field cannot be empty.
Miscellaneous security settings
(Figure 33).
4
103