Brocade Communications Systems WFT-2D User Manual page 144

4
Flyover settings
FIGURE 28
•
•
•
•
•
•
•
•
•
•
•
•
6. Remove product properties you do not want to display on flyover by selecting the
92
Options dialog box (Flyovers pane, Product tab)
a. Select the type from the Type list, if necessary.
protocol
b. Select each property you want to display in the product flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available:
FC (default)
Name
Device Type
WWN
IP Address
Domain ID
Class
Tag#
Serial #
Vendor
Model #
Port Count
Seed Switch
c. Click the right arrow to move the selected properties to the Selected Properties table.
d. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table, if necessary.
The properties displayed in the Selected Properties table appear in the flyover display.
Selected Properties table and clicking the left arrow.
•
Firmware
•
Location
•
Contact
•
Description
•
Management Link
•
Operational Status
•
Enclosure
•
Reason
•
FID
•
Base Fabric for Transport
•
Base Switch
•
Zone Alias
Brocade Network Advisor SAN User Manual
property in the
53-1003154-01