Editing Host Adapter Credentials - Brocade Communications Systems WFT-2D User Manual

3
Host discovery
3. Enter a discovery request name (such as MyVMManager) in the Discovery Request Name field.
4. Select Hosts from VM Manager from the list.
5. Select All VM or an individual VM from the list.
6. Click Add.
7.
8. Configure discovery authentication by choosing one of the following options:
9. Enter the port number in the Port field.
10. Enter your user name in the User ID field.
11. Enter your password in the Password field.
12. Click OK on the Add Host Adapters dialog box.
13. Click Close on the Discover Host Adapters dialog box.

Editing host adapter credentials

To edit host credentials, complete the following steps.
1. Select Discover > Host Adapters.
2. Select the Host in the Discovered Hosts table and click Edit.
62
All hosts that are part of a discovered VM Manager and have a registered host name display in
the list. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.
Configure Host credentials by choosing one of the following options:
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
step 8.
•
To configure WMI server credentials, select the Windows Management Instrumentation
(WMI) option. Continue with
If you do not need to configure Host credentials, skip to
•
To configure discovery with authentication, select the HTTPS option in Protocol.
•
To configure discovery without authentication, select the HTTP option in Protocol.
The HCM agent default is 34568. The CIM server HTTPS default is 5989. The CIM server HTTP
default is 5988. The WMI HTTPS default is 5986. The WMI HTTP default is 5985.
The HCM agent default is admin. Leave this field blank for the CIM server.
The HCM agent default is password. Leave this field blank for the CIM server.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
a host group displays in the Discovered Hosts table of the Discover Host Adapters dialog box.
The discovery status is updated dynamically.
The Discover Host Adapters dialog box displays.
The Edit Host Adapters dialog box displays.
step 8.
step
Brocade Network Advisor SAN User Manual
step 9.
12.
53-1003154-01