Brocade Communications Systems WFT-2D User Manual page 126

4
Configurable preferences
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74
SAN End Node Display — Use to display (or turn off display of) end nodes on the Connectivity
map for newly discovered fabrics. Disabling end node display limits the Connectivity map to
switch members only. For more information, refer to
SAN Ethernet Loss Events — Use to enable events for a loss of ethernet connection to SAN
switches. For more information, refer to
SAN Names — Use to set whether unique names are required. For more information, refer to
"Name settings" on page 94.
Miscellaneous Security — Use to configure server security configurations and the login banner.
For more information, refer to
Server Backup — Use to configure backup settings. Backup is a service process that
periodically copies and stores application files to an output directory. The output directory is
relative to the server and must use a network share format to support backup to the network. If
you use a network path as the output directory, you must add network credentials. For more
information, refer to "Server Data backup"
Syslog Registration — Use to automatically register the server as the syslog recipient on
products. For more information, refer to
Trap Registration — Use to automatically register the server as the trap recipient on products. If
SAN products have Informs enabled, the registration is for the Informs. For more information,
refer to "SNMP Trap Registration settings"
Trap Forwarding Credentials — Use to configure SNMP credentials for the traps forwarded by
the server. For more information, refer to
page 107.
Certificates — Use to manage keystore and truststore certificates as well as enable or disable
certificate validation. For more information, refer to
Client Export Port — Use to assign a communications port between the client and server. For
more information, refer to
Client/Server IP — Use to configure IP address of the Management application server. For more
information, refer to "Client/Server IP"
Memory Allocation — Use to configure memory allocation for the client and server. You can also
use this option to configure asset polling. For more information, refer to
settings" on page 120.
Product Communication — Use to configure HTTP or HTTP over SSL for connecting to the
server. For more information, refer to
FTP/SCP/SFTP servers — Use to configure internal or external FTP, SCP, or SFTP server
settings. For more information, refer to
Server Port — Use to configure server port settings. For more information, refer to
settings" on page 130.
Support Mode — Use to configure support settings to enable enhanced diagnostics. For more
information, refer to "Support mode settings"
"SAN Ethernet loss events"
"Miscellaneous security settings"
on page 75 and
"Syslog Registration settings"
on page 106.
"SNMP Trap forwarding credential settings"
"Client export port settings"
on page 116.
"Product communication settings"
"FTP/SCP/SFTP server settings"
on page 131.
"SAN End node display" on page 88.
on page 89.
on page 102.
"Server Data restore"
on page 105.
"Certificates" on page 109.
on page 115.
"Memory allocation
on page 124.
on page 125.
Brocade Network Advisor SAN User Manual
on page 81.
on
"Server port
53-1003154-01