Rediscovering A Previously Discovered Vm Manager; Deleting A Vm Manager From Discovery; Viewing The Vm Manager Discovery State - Brocade Communications Systems WFT-2D User Manual

Rediscovering a previously discovered VM manager

To return a VM manager to active discovery, complete the following steps.
1. Select Discover > VM Managers.
2. Select the VM manager you want to return to active discovery in the Previously Discovered
3. Click Discover.
4. Click OK on the confirmation message.
5. Refresh the Discover VM Managers list by clicking Refresh.
6. Click Close on the Discover VM Managers dialog box.

Deleting a VM manager from discovery

To delete a host permanently from discovery, complete the following steps.
1. Select Discover > VM Managers.
2. Select the VM manager you want to delete permanently from discovery in the Previously
3. Click Delete.
4. Click OK on the confirmation message.
5. Refresh the Discover VM Managers list by clicking Refresh.
6. Click Close on the Discover VM Managers dialog box.

Viewing the VM manager discovery state

The Management application enables you to view device discovery status through the Discover VM
Managers dialog box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > VM Managers.
2. Right-click the Hosts node select Expand All to show all devices.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Discover VM Managers dialog box displays.
Addresses table.
The rediscovered VM manager displays in the Discovered VM Managers table.
The Discover VM Managers dialog box displays.
Discovered Addresses table.
The Discover VM Managers dialog box displays.
The Discovery Status field details the actual status message text, which varies depending on
the situation.
The following are samples of actual VMM status messages:
•
Active
•
Failed – Not reachable
•
Failed – Authentication failure
VM Manager discovery
3
71