Deleting A Fabric; Viewing The Fabric Discovery State - Brocade Communications Systems WFT-2D User Manual

4. Click OK on the confirmation message.
5. Click Close on the Discover Fabrics dialog box.

Deleting a fabric

To delete a fabric permanently from discovery, complete the following steps.
1. Select Discover > Fabrics.
2. Select one or more switches that you want to delete permanently from discovery in the
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Fabrics dialog box.

Viewing the fabric discovery state

The Management application enables you to view device status through the Discover Setup dialog
box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > Fabrics.
2. Right-click a fabric and select Expand All to show all devices in the fabric.
Brocade Network Advisor SAN User Manual
53-1003154-01
The rediscovered fabric displays in the Discovered Fabrics table.
The Discover Fabrics dialog box displays.
Previously Discovered Addresses table.
The Discover Fabrics dialog box displays.
The Name field displays the discovery status icons in front of the device name. The following
table illustrates and describes the icons that indicate the current status of the discovered
devices.
TABLE 10
Discovery Status Icons
Icon Description
Displays when the fabric or host is managed and the management status is okay.
Displays when the switch is managed and the switch management status is not okay.
Displays when the fabric, switch, or host is not managed or not monitored.

Viewing the fabric discovery state

3
45