Ip Igmp Query-Max-Response-Time - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
The default query interval value is 125 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a 10-second query interval for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-interval 10

ip igmp query-max-response-time

Use the ip igmp query-max-response-time command in Internet Configuration mode to
configure the maximum response time interval for the specified interface. It is the maximum
query response time advertised in IGMPv2 queries on this interface. The time interval is
specified in tenths of a second.
Syntax
tenthsofseconds
ip igmp query-max-response-time
no ip igmp query-max-response-time
tenthsofseconds — Maximum response time. (Range: 0-255 seconds)
•
Default Configuration
The default maximum response time value is 100 tenths of seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a maximum response time interval of one second for
VLAN 15.
590
IGMP Commands