Show Ip Igmp-Proxy Groups; Show Ip Igmp-Proxy Groups Detail - Dell PowerConnect 8024 Cli Reference Manual

show ip igmp-proxy groups

Use the show ip igmp-proxy groups command in Privileged EXEC mode to display a table of
information about multicast groups that IGMP Proxy reported. It displays status parameters
only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about multicast groups that
IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................ vlan13
Group Address Last Reporter
Mode Sources
------------- ---------------
225.0.1.1 13.13.13.1
225.0.1.2 13.13.13.1

show ip igmp-proxy groups detail

Use the show ip igmp-proxy groups detail command in Privileged EXEC mode to display
complete information about multicast groups that IGMP Proxy has reported.
Syntax
show ip igmp-proxy groups detail
Up Time Member State Filter
------- ------------ ----------- ------
7 DELAY-MEMBER Exclude
48 DELAY-MEMBER Exclude
IGMP Proxy Commands
0
0
603