Dell PowerConnect 8024 Cli Reference Manual page 379

Syntax Description
show interfaces port-channel [
port-channel-number ] — Number of the port channel to show. This parameter is optional. If
• [
the port channel number is not given, all the channel groups are displayed. (Range: Valid port-
channel number, 1 to 48)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
Console#show interfaces port-channel
Channel Ports
------- ---------------------------------------
ch1 Active: 1/e1, 2/e2
ch2 Active: 2/e2, 2/e7 Inactive: 3/e1
ch3 Active: 3/e3, 3/e8
ch4 No Configured Ports
ch5 No Configured Ports
ch6 No Configured Ports
ch7 No Configured Ports
ch8 No Configured Ports
Hash algorithm type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
port-channel number
]
Hashing-mode
------------
1
2
3 <default>
5
6
4
3 <default>
3 <default>
Port Channel Commands
379