Dell PowerConnect 8024 Cli Reference Manual page 1091

Unit
Model Identifier
Switch Status
Switch Description
Expected Code Version
Detected Code Version
Detected Code in Flash
Boot Code Version
Up Time
This example displays information about all units in the stack.
console>show switch
Management Standby
Sw Status Status
-------------------------------------------------------------
1 Mgmt Sw
Different fields in the display are explained as follows:
Unit
Switch
Management Status
Preconfigured Model Identifier
Description
This field displays the model identifier for this switch.
Model Identifier is a 32-character field assigned by the
switch manufacturer to identify the switch.
This field displays the switch status. Possible values are OK,
Unsupported, Code Mismatch, Config Mismatch, or Not
Present.
This field displays the switch description.
This field indicates the expected code version.
This field displays the version of code running on this
switch. If the switch is not present and the data is from
preconfiguration, the code version is "None."
This field displays the version of code that is currently
stored in FLASH memory on the switch. This code will
execute after the switch is reset. If the switch is not present
and the data is from pre-configuration, then the code
version is "None."
This field displays the version of the boot strapping code.
This field displays the system up time.
Preconfig Plugged-in
Model ID Model ID
PC8024 PC8024
Description
This field displays the unit identifier assigned to the switch.
This field indicates whether the switch is the Management
Switch, a stack member, or the status is unassigned.
This field displays the model identifier of a preconfigured
switch ready to join the stack. The Model Identifier is a 32-
character field assigned by the switch manufacturer to
identify the switch.
System Management Commands
Switch Code
Status Version
OK 3.0.0.1
1091